[Elecraft] K2 & K1 E-Numbers ..

[Don Wilhelm]

Andy,

Download the manuals from the Elecraft website and you will have the 
part numbers that you need.
Much easier than having us look them up for you.

73,
Don W3FPR

On 3/1/2012 10:23 AM, Andy - GM0NWI wrote:
> Good Afternoon Folks From "Bonnie Scotland"...
>
> Just wonderin' if some kind person here on the list could possible post up..
>
> The "E Numbers" for the black knobs that cover the shafts on the Volume ...
> RF-Gain Switches etc (and all others I've not included)...
>
> On The ..
>
>
>
> Elecraft K2 Transceiver
>
> Elecraft K1 Transceiver
>
>
>
> I "think" the knob SIZES (so therefore e-numbers) WILL be different in both
> cases here ... From what I remember
> the size of the knobs on the K1 are "slightly SMALLER" in diamater to the K2
> - So perhaps the e-numbers for
> stock purposes will be different..
>
> I realise the "E-Numbers" for these will be in the subsequent build manuals
> for each rig... Unfortunatley at
> the moment, my manual is temporarily stored in an un-accessable place for me
> here in the home..
>
> Hope this doesn't cause too much fuss for folks .. Lookin' forward to what
> ever folks can share&  THANKS for
> all the help on this..
>
>
> 73's
> Andy
> GM0NWI						andy.gm0nwi1 at btinternet.com
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>