[Elecraft] KX3 and NaP3

[Igor Sokolov]

Barry,
I am using KX3 +NaP3+LP bridge + TR4W logger and have no issues with the 
offset. Na3P allows one to set different offset for different modes but I 
use only global offset of 8000Hz and it works for me at least on CW and SSB 
with no problems.

73, Igor UA9CDC

----- Original Message ----- 
From: "Barry LaZar" <k3ndm at comcast.net>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Friday, June 29, 2012 12:18 AM
Subject: [Elecraft] KX3 and NaP3


> Now that Field Day is over, I've had a chance to play with my KX3. I
> have NaP3 running with my KX3 and using an E-MU 0202 sound card with my
> laptop. It's a real WOW! I have a panadapter, effectively, and I can
> play with the PowerSDR filters that are a part of NaP3. NaP3 follows my
> tuning of the KX3 or I can click on a signal and have the KX3 move to
> it. It is a really useful adjunct to the overall capability. The only
> thing I've had a problem with is the IF offsets. They are different for
> each mode, and not by a little. Unfortunately, NaP3 doesn't remember the
> offsets by mode. However, I still like the match up and suggest KX3
> owners have a go at trying this. The offset issue can be addressed by
> noting them and putting them in manually, at least for the time being.
> Having the receiver I/Q available seems to have proved a seriously good
> idea.
>
> 73,
> Barry
> K3NDM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html