[Elecraft] Firmware final?

[dmoes at nexicom.net]

CW decoder worked fine for me on field day.  and since I still have 
the CW training wheels on, I sure needed the help.

CW decode THR at 3 and speed at 30-90 (I think what ever is the higher 
setting)   this decoded fine with speeds well below 30.    cant 
remember exact AGC settings but fairly high threshold for CW.     I do 
tend to set AF gain to one level and use rf gain for good listening 
level   this also helps the cw decoder by keeping noise down.



David Moes
VE3DVY


>
> --- Original message ---
> Subject: Re: [Elecraft] Firmware final?
> From: Scott Manthe <scott.manthe at gmail.com>
> To: <elecraft at mailman.qth.net>
> Date: Thursday, 28/06/2012 11:47 AM
>
> Eric,
> I thought that there were issues with the CW decoder w/4.51. Did I 
> miss
> the fix on this?
>
> 73,
> Scott, N9AA
>
>
> On 6/28/12 6:23 AM, Eric Swartz WA6HHQ - Elecraft wrote:
>>
>> The beta test of 4.51 was successful and it will be changed to final 
>> on the web site shortly. Feel free to download the zipped beta files 
>> and install them. The final version is exactly the same.
>>
>> 73,
>> Eric. WA6HHQ
>>
>> http://www.elecraft.com
>> _..._
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html