[Elecraft] K3 just goes off

[WM3M]

I have had similar problems which ended up being poor connections from the 
power supply, where crimped connections, like on the power poles are not 
making good contact.  Now I solder all DC connections from power supply, if 
possible.  Also, these poor connections lower the power/amps making it to 
the rig, causing strange problems.  Good luck 73
Emory  WM3M

-----Original Message----- 
From: Lee Buller
Sent: Saturday, June 23, 2012 10:16 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 just goes off


This has not happened to me before....

Running some FD here on CW for about an hour in an AC room

PA 35C FP 31C

The rig just went off.  Dead.  Power supply is ON.  Pressed the power
button....comes back on.

Anyone see this before....I have not.

Lee


In our day and age it seems that Common Sense is in short supply.  If you 
don't
have any Common Sense - get some Common Sense and use it.  If you can't find 
any
Common Sense, ask for help from somebody who has some Common Sense.  Is 
Common
Sense divine?

Common Sense is the image of the Creator expressing revealed truth in my 
mind.
-  John W. (Kansas)

Never interfere with anything that isn't bothering you.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html