[Elecraft] Using K2 Serial Cable on K3

[Vic K2VCO]

You can use a cable built for connecting a K2 to a computer serial port on a K3.

You can NOT necessarily use a cable which works on a K3 with a K2. In particular, a 
'standard serial cable' which has more pins connected than the ones Fred mentions can 
seriously damage a K2.

On 6/20/2012 6:36 PM, Fred Jensen wrote:
> On 6/20/2012 6:07 PM, Tom Z wrote:
>> Can I use my K2 serial cable with a K3? We are getting ready for Field Day
>> and trying to figure out what we can sare among our stations.
>
> I think so.  The K2 "serial connector" is *not* RS-232.  Only RXD, TXD,
> and ground are.  The rest are internal signals at internal levels.  When
> I built mine, I did just those three, and that should work OK for your
> K3.  Possibly someone with more than my miniscule knowledge will weigh in.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2012 Cal QSO Party 6-7 Oct 2012
> - www.cqp.org
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/