[Elecraft] Re: Field Day Operating Tips (including some KX3-specific)

[Edward R. Cole]

Noted in the "tips" the following:
--------------
Here are the conditions under which TX current is reduced:

1. 5.0 W or less in CW, FSK-D, and FM modes when key-down supply
voltage is 11 V or higher
--------------
Can I take from this that FM Mode has been implemented in the KX3 
firmware?  It hadn't in earlier versions.

This would be good news since I will immediately be using my KX3 with 
a 144-28 transverter on 2m-FM when I have the KX3 constructed and 
installed in the shack.  No this is not the KX3-2M module should 
anyone ask.  Hope that will be coming out soon for beta-test.

I should have my KX3 by July 2nd (at latest).



73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-?
DUBUS Magazine USA Rep dubususa at gmail.com
"Kits made by KL7UW" http://www.kl7uw.com/kits.htm
======================================