[Elecraft] K3 + P3 + Microkeyer

[Mike K2MK]

Hi Chris,

To add to Joe's answer, if the Ultrabeam controller does not an interrupt
circuit built into it you could use the N8LP Tuning Relay.
http://www.telepostinc.com/STR.html

73,
Mike K2MK


Joe Subich, W4TV-4 wrote
> 
> If the Ultrabeam controller provides a PTT interrupt circuit you can
> use the KPAK3AUX Key Line Interrupter to disconnect the Key line in
> the KPAAUX cable and route Key Out from the K3 through the Ultrabeam
> controller to the PA Key jack on the KPA-500.
> 
> 73,
>     ... Joe, W4TV
> 
> On 6/16/2012 4:31 AM, OE5CSP-Chris wrote:
>> Can I use the key line interrupter (KPAK3AUX) between the K3 and the
>> ultrabeam controller? I´m looking for a way to protect the beam( keying
>> while elements are moving) without buying a microham device(rather
>> expensive), or is there another way I could go?
>>
>> 73,Chris-OE5CSP
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-Microkeyer-tp7557158p7557717.html
Sent from the Elecraft mailing list archive at Nabble.com.