[Elecraft] 2m Transverter keeps switching back to 6m

[Keith Heimbold]

This was solved quickly by changing the frequency range of my NAP3 software to include the upper range of the 2m band. 

Unfortunately I was consumed by honey do's yesterday so I spent minimal time behind the K3. Of course I had more free time with the radio on Saturday but the band was more or less dead out here in So Cal during that time. Thus why it is called the magic band (I also call it the Retirement band, hihi, because you need to be retired to really enjoy all the openings especially here out in the western US).

This reflector is awesome and certainly very solution oriented. I had the issue resolved in a matter of minutes.

Thanks again,

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Jun 11, 2012, at 7:11 AM, "Rich - K1HTV" <k1htv at comcast.net> wrote:

> If it happened that the switching back from 2 Meters to 6M occurred during the
> contest you can credit you K3 knowing that the 6M band was open for lots of
> E-skip and was reminding you, like the Chick Filet commercial to 'Eat mor
> chickin" or "Work more 6 Meters". You have a smart K3, :-). It knew that there
> was a great Es opening. 
> 
> I was at K8GP and was running W6 and W7 stations Sunday afternoon. We ran K3
> radios at the more 6M positions at the K8GP multi-op station in the VHF contest.
> Being up high were heard many very strong locals, one of them, W3IP with a K3,
> only a mile or so up the road running high power. Our K3s worked great from our
> Mt. Weather site in FM19bb. We worked over 850 stations in 249 grids on the
> Magic Band, including many European stations.
> 
> Seriously, hope that you can figure out what is causing the switching problem.
> Sorry that I am of no help.  
> 
> Enjoy your K3. I certainly am enjoying mine.
> 
> 73,
> Rich - K1HTV
> 
> = = =
> 
> -----Original Message-----
> From: Richard Ferch [mailto:ve3iay at storm.ca] 
> Sent: Saturday, June 09, 2012 21:33
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] 2m Transverter keeps switching back to 6m
> 
> Do you have any software with radio control capability (e.g. a logging
> program) connected to the K3? If so, does the problem still happen if you
> disable the software control?
> 
> 73,
> Rich VE3KI
> 
> 
> AG6AZ wrote:
> 
>> Quick question.  My K3 keeps switching back to 6m when I turn it to 2m.  It
> will go to any frequency on 2m and then a second later switches back to 54.0
> MHz.  Any thoughts?
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html