[Elecraft] K3/0

[D Joyce]

Also forgot to mention that the MH2 needs bias and JMP1 needs to be in place 
in the Control RRC - see 2nd page of the K3 Twin section of the RRC User 
Manual.

73,  Doug  VE3MV

----- Original Message ----- 
From: "D Joyce" <d_joyce at sympatico.ca>
To: "Eric Jorgensen" <eric.jorgensen at me.com>; <elecraft at mailman.qth.net>
Sent: Saturday, June 09, 2012 3:42 PM
Subject: Re: [Elecraft] K3/0


> Eric:
> If you are using the factory cables RRK0CBL, then the microphone (MH2) 
> plugs into the front panel of the K3/0, so I think you need to set the MIC 
> SEL to fP.L (or H)
>
> 73,  Doug  VE3MV
>
> ----- Original Message ----- 
> From: "Eric Jorgensen" <eric.jorgensen at me.com>
> To: <elecraft at mailman.qth.net>
> Sent: Saturday, June 09, 2012 2:47 PM
> Subject: [Elecraft] K3/0
>
>
>> Got my K3/0 and RemoteRigs this morning.
>>
>> Everything works perfectly except transmit audio.  MIC SEL is set to 
>> rP.L.
>>
>> Using factory cables, all set up like the book says they should be.
>>
>> Any ideas?
>>
>> Thanks
>>
>> Eric
>> W1NEJ
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>