[Elecraft] KX3 I/Q out span

[Greg]

Gernot

The 15 kHz limit is only with regard to be dual watch function. The span
you will be able to see on the software is dependent upon the sample rate
of the sound card used. So if you use a 96 kHz sample rate sound card you
will see just slightly less than that on the display. Probably around 92
kHz.

73
Greg
On Jun 7, 2012 1:50 PM, "DF5RF" <gt-i at gmx.net> wrote:

> The KX3 seems to have direct I/Q outputs to the sound card - which
> sounds really attractive to me.
> The manual says the span depends on the sound card sampling rate, like
> 48/96/192kHz. But it does not tell what kind of band width one can expect.
> As I read further, there seems to be a 15kHz limitation imposed by a
> default roofing filter, and this will go narrow automatically under
> certain conditions.
> Again, what kind of span can I expect, and will it depend on any filter
> settings or not?
> Thanks and 73
> Gernot
> DF5RF
> K2 #2328
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>