[Elecraft] [K3] N3FJP rig control settings?

[km5ps]

On 6/4/2012 8:39 AM, John Shadle wrote:
> Hi Terry,
> I have been using N3FJP's AC Log for a while, both with my K2 and now
> my K3. I haven't had any trouble at all with DX spotting and clicking
> on a spot to do a frequency change with either rig. I can take a look
> at my settings if you like.
>
> So, basically, clicking on a spot doesn't work? You're getting the
> wrong mode and even frequency? That's strange...
>
> N3FJP recently updated AC Log and it's a much improved program. It's
> now at version 3.2 (although I have only upgraded to 3.1 so far,
> myself). If you purchased it in the past, you're entitled to a free
> upgrade.
>
> It might be best to try to post your question to the AC Log list, too.
> I've found Scott and the rest of the list members invaluable in
> setting up the software.
>
> http://groups.yahoo.com/group/N3FJP_Software_Users/
>
> 73
> -john W4PAH
> Madison, WI
>
>> If anyone has been successful in finding a way to send DX spot rig command strings *smoothly* from N3FJP's ACLog to a K3, would you please email me with the software settings you've used.  I have not been able to get ACLog to interface well with my K3 (#474) since I bought the rig (the software worked fine with my FT1000MP).  The software reads the K3 data just fine.  But DX spot clicks seem to go very slowly and the mode, band and frequency changes seem to be all mixed up.  Scott, N3FJP, told me that Elecraft sends the commands to the K3 in a "non-standard" format but claims to "generally support" the Elecraft line. The command string references I have found in the K3 manual have not been successful, but I don't rule out an error on my part there.
>>
>> Other than recommending other logging programs can anyone offer an ACLog command solution. I'm not a contester and have tried all the popular logging/rig control offerings that many of you use.  Most programs offer WAY too many features for my needs.  Many thanks.
>>
>> 73,
>>
>> Terry, W0FM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.htm

Terry-
I have been using ACLog with my k3 for a couple of years now and have no 
problem with it.  When I click on a dx spot it goes right to the freq.  
These are my setting:
com port 1
Baud Rate 38.4
Parity-DTR
Radio Polling rate   500ms
I am using verison 3.0 on ACLog.  I did not know they had an upgrade 
out.  But will go and download it soon.
Hope this helps.

John-KM5PS
k3 #3906