[Elecraft] recording from LINE OUT

[Jorge Diez - CX6VM]

Thanks Matt and Don for all the help about that.

I went to the station this afternoon to test the cables again.

All seems good now again. I have audio from both K3 and TS850. 

Anyway TS850 audio level in the recorded file is higher.

I increased the LIN OUT level and seems I am comfortable with LIN OUT = 30
to have a decent audio on the recorded file

This will be a problem during CW or SSB operation? I think not, but just to
be sure.

Thanks,
Jorge
CX6VM/CW5W

-----Mensaje original-----
De: Matt Zilmer [mailto:mzilmer at verizon.net] 
Enviado el: sábado, 02 de junio de 2012 19:45
Para: Jorge Diez - CX6VM
CC: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] recording from LINE OUT

Jorge,

That *should* work fine.  A Line Out level of 10 is what I use here for
receive audio on data modes like MT63, Olivia, etc.

Make sure you're using a stereo patch cord from the K3 to the input to the
recording device.

73,
matt W6NIA

On Sat, 02 Jun 2012 18:12:07 -0300, you wrote:

>Hello,
>
> 
>
>I trying to record from K3 to recallpro but no audible audio in the 
>recorded file
>
> 
>
>I have LIN OUT = 10
>
> 
>
>I something else to take care? For example MIC SEL and LIC+LIN settings?
>
> 
>
>Some months ago I recorded and I had a good audio files with clear RX 
>and TX audio, but now I couldn´t.
>
> 
>
>I am recording also from a TS850 and the audio is OK in the recorded file.
>
> 
>
>Thanks,
>
>Jorge
>
>CX6VM/CW5W
>
> 
>
> 
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net Please help support this email 
>list: http://www.qsl.net/donate.html