[Elecraft] KBX30/80 Module

[Don Wilhelm]

It is not unusual at all for the KX1 4 band model to have greater power 
output on 80 meters.  How much so depends on the p[articular KX1 and the 
construction care used.

73,
Don W3FPR

On 5/31/2012 5:14 PM, AC8JW wrote:
> I have finished installing the KBX3080 module along with the power module.
> Things appear to be going well, but I did note that when I took a reading
> with my VTVM and RF probe on the antenna output, my readings on 80M were
> quite a bit higher than on the other frequencies.
> 80M 6.6 volts
> 40M 5.2 volts
> 30M 5.2 volts
> 20M 5 volts.
>
> Is the normally what is expected?
>
> Thanks.
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KBX30-80-Module-tp7556858.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>