[Elecraft] Local PC > Remoterig > K3 with HRD and N1MM Logger?

[Brandon Hansen [KG6YPI]]

Hello Steve,

     Yes it is possible to control the remote K3 with a PC only. This 
particular setup requires special configuration on the RemoteRig devices 
as it is not the same type of setup as the remote K3 to control (K3/100 
or K3/0) Twin mode.

I will send a PDF that shows the required configuration for remote K3 to 
control PC in another email.

-- 
73,
Brandon Hansen, KG6YPI
831-763-4211 (x168)
K3-Remote Support
Elecraft



On 6/1/2012 10:17 AM, Steve Haines wrote:
> I would like to remote my K3 using the Remoterig devices, controlling
> the K3 from a PC rather than from a K3/0. I would anticipate using HRD
> for the radio control and I need to use N1MM Logger as my contest logger.
>
> 1. Is this combination possible? Are any of you doing this now?
>
> 2. Is the solution to running HRD AND N1MM Logger at the same time (both
> need the comm port attached to the K3) the use of N8LP's software "LP
> Bridge" that allows two programs to share a comm port?
>
> I have not purchased the Remoterig devices yet because I really want to
> be able to both control the K3 remotely (with a PC) AND run a contest
> logger at the same time.
>
> Thanks for your help. 73 de Steve ZP9EH/W9CPI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


-- 
73,
Brandon Hansen, KG6YPI
831-763-4211 (x168)
K3-Remote Support
Elecraft