[Elecraft] K3 transmit audio cuts out

[Ham Radio]

Don,

Will do so. I did switch out two complete headsets including adapter and 
foot switch and had the same experience.  I have done a RFI cleanup effort 
and so far things have not re-occurred.

Thanks,

Ketih
AG6AZ

-----Original Message----- 
From: Don Wilhelm
Sent: Saturday, July 28, 2012 3:44 PM
To: Keith Heimbold
Cc: Eugene Balinski ; elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 transmit audio cuts out

Keith,

You could also have a loose connection in your microphone cable. When
operating SSB, if there is no audio, there will be no RF output.
So you can look at the PTT, the audio, the power supply, and just about
every thing else in your station.  Cables are usually the weak link.

73,
Don W3FPR

On 7/28/2012 5:34 PM, Keith Heimbold wrote:
> Gene,
>
> Great suggestion. It maybe the connector going into the rig or the 
> connectors which I built.
>
> Thanks,
>
> Keith
> AG6AZ
>
>