[Elecraft] K2 Dial Calibration Question

[Don Wilhelm]

Fred,

It could be either the VFO or the filters or both.

Go to my webpage www.w3fpr.com and follow the instructions in the K2 
Dial Calibration article.  That should line everything up quite nicely 
(within 20 or 30 Hz anyway).

73,
Don W3FPR

On 7/28/2012 6:30 PM, KC9QQ wrote:
> I have noticed that my K2 dial calibration seems to match my ICOM 756 Pro III
> for all CW stations.  However, when I compare signals SSB signals the K2
> seems to be off by about 200 cycles.  Is this a dial calibration issue or
> something related to the filters?
>
>