[Elecraft] K3 - sound in problem

[Matt Maguire]

Running compression with digimodes is generally a bad idea, as it can
distort the signal (depending on the modulation scheme). If you are going
to use the USB mode on the KX3 for ditigal modes, you should set the CMP
setting to '0', and adjust the PC output level/mic gain to get four steady
bars on the "ALC meter", then set the power control to the desired level.
You should also ensure that the MIC BIAS and MIC BTN menu items are set to
"OFF".

73, Matt VK2ACL.

On Thu, Jul 26, 2012 at 7:41 PM, VE3NFK <john.turgoose at gmail.com> wrote:

> Hi
>
> Probably missing something stupid... WSPR and PSK etc did not show any
> output when transmitting...
> (they used too)... After 'messing around' I got a signal out by cranking up
> CMP from 7 to 24...
> this seems to me to be the 'wrong' way ?  Advise appreciated (including
> manual reference if I have missed it)
>
> thanks and 73  John VE3NFK
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-sound-in-problem-tp7559810.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>