[Elecraft] [KX3] KX3 speaker grille

[Wayne Burdick]

Thanks for your patience, Thomas. Nothing is ever quite perfect the  
first time around....

As for the KXPD3, I'm experimenting with different set screws for the  
contacts. But you don't need to wait for me: several customers have  
applied a rounded point to their existing set screws with excellent  
results.

73,
Wayne
N6KR

On Jul 26, 2012, at 10:22 AM, Thomas Horsten wrote:

> Wayne,
>
> Glad to hear it. This was my gut feeling when I got my kit, and I  
> decided
> not to follow that part of the assembly guide and leave the grille in
> place. Now I'm glad I did! I'll follow whatever recommendations you  
> come up
> with for the remaining vibrations, but on my unit it's not much of an
> issue, and only occurs at a very narrow range of frequencies.
>
> I hope you'll be doing similar research as to the possible cause of  
> the
> KXPD3 issues, and I'm going to hold off trying any radical mods  
> until I get
> some conclusions from your end.
>
> 73, Thomas M0TRN
>
> On 26 July 2012 18:00, Wayne Burdick <n6kr at elecraft.com> wrote:
>
>> If your grille was removed and you'd like to put one back in, we'll
>> send you a new gasket/grille assembly at no charge. The installation
>> is pretty easy and should only take a few minutes.
>>
>> My apologies for any convenience.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html