[Elecraft] K1 Kit Question

[Gil G.]

What about turning a four-band board into a three-band board with 80m?

Gil.
--
New site: http://radiopreppers.com
PGP Key: http://keskydee.com/gil.asc

On Jul 21, 2012, at 2:55 PM, Bruce Beford wrote:

> Unfortunately, this is not an option. On the 4 band board, each of two
> adjacent band pairs shars the output low pass filter. The bands must be
> close together for this to work, i.e. 40/30 & 20/15 or 20/17. If one wants
> 80M, it must be built on a 2 band board.