[Elecraft] KX3 speaker: distortion from mechanical vibration?

[Don Wilhelm]

Sorry, that should have been "Andrew" rather than Ron

On 7/19/2012 3:46 PM, Don Wilhelm wrote:
> Ron,
>
> No that is not the one I was referring to (although that may be a
> possible candidate too).
> Actually, I have zero gap at that location and all else along that edge
> between the top and bottom covers.  It looks to me as though your bottom
> cover is not fully seated - you should not be able to get paper in
> there.  Also the bottom cover should not stick out further than the
> metal that the speaker is mounted on.
>
> Could you please put the photos I sent to you on that "tinypic" site. so
> all interested might take a look.
>
> 73,
> Don W3FPR
>
> On 7/19/2012 3:28 PM, Andrew Moore wrote:
>> Ron - I believe they mean this one (and similarly the one on the left side
>> of the speaker)
>>
>> *i47.tinypic.com/66chg3.jpg*
>> *
>> *
>> On Thu, Jul 19, 2012 at 3:04 PM, Ron D'Eau Claire <ron at cobi.biz> wrote:
>>
>>> What gap?
>>>
>>> 73, Ron AC7AC
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>