[Elecraft] com0com N1MM and CWSkimmer

[Eric Van der Velde]

Matt,
I will have a look into VSPE. Looks like it also has ethernet functionality.
Thanks,
Eric PE3V
From: mzilmer at magellangps.com
To: ericvandervelde at hotmail.com; wrcooke at yahoo.com
CC: elecraft at mailman.qth.net
Date: Mon, 16 Jul 2012 11:13:30 -0700
Subject: RE: [Elecraft] com0com N1MM and CWSkimmer

There is also VSPE for general purpose serial port virtualization. I use LP Bridge for RMS Express.  It expects separate control and keying ports.   Good luck! Matt ZilmerConsultant – Product Management Dept.Magellan Navigation / MiTAC Digital Corp.Tel: (909) 394-6052Cell: (909) 730-6552Si fractum non sit, noli id reficere From: Eric Van der Velde [mailto:ericvandervelde at hotmail.com] 
Sent: Monday, July 16, 2012 10:59 AM
To: Matthew Zilmer; wrcooke at yahoo.com
Cc: elecraft at mailman.qth.net
Subject: RE: [Elecraft] com0com N1MM and CWSkimmer Matt, LP Bridge works fine! com0com looks more ligthweigth to me and gives me the possibility to run CWSkimmer on another PC the N1MM computer. Thanks,  Eric PE3V > From: mzilmer at magellangps.com
> To: ericvandervelde at hotmail.com; wrcooke at yahoo.com
> CC: elecraft at mailman.qth.net
> Date: Mon, 16 Jul 2012 10:51:40 -0700
> Subject: RE: [Elecraft] com0com N1MM and CWSkimmer
> 
> Try LP Bridge.
> 
> Matt Zilmer
> Consultant - Product Management Dept.
> Magellan Navigation / MiTAC Digital Corp.
> Tel: (909) 394-6052
> Cell: (909) 730-6552
> Si fractum non sit, noli id reficere
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Eric Van der Velde
> Sent: Monday, July 16, 2012 10:41 AM
> To: wrcooke at yahoo.com
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] com0com N1MM and CWSkimmer
> 
> 
> I also use a serial port (COM1) for communication between te K3 and my computer. The thing is that I have N1MM and CWSkimmer running at the same time. They both need information from the K3 (like current frequency). 
> I need some splitter which sends the QRG to both N1MM and CWSkimmer.
> thanks,
> Eric PE3V
> 
> > CC: elecraft at mailman.qth.net
> > From: wrcooke at yahoo.com
> > Subject: Re: [Elecraft] com0com N1MM and CWSkimmer
> > Date: Mon, 16 Jul 2012 12:34:44 -0500
> > To: ericvandervelde at hotmail.com
> > 
> > I bought an RS-232 card and gave up on the USB converter.
> > 
> > Sent from my iPhone
> > 
> > On Jul 16, 2012, at 10:38, PE3V <ericvandervelde at hotmail.com> wrote:
> > 
> > > I am trying to setup a serial connection between an Elecraft K3, 
> > > CWSkimmer and N1MM using com0com/hub4com.
> > > 
> > > I don't get it working. Anyone on this forum who got this working properly?
> > > 
> > > Thanks Eric PE3V (ex PA3FKN)
> > > 
> > > PS I tried LP Bridge and that's working fine, but com0com looks a 
> > > little bit more ligthweigth .... (and if I can get it working I also 
> > > have the possibility to run the serial ports over ethernet)
> > > 
> > > --
> > > View this message in context: 
> > > http://elecraft.365791.n2.nabble.com/com0com-N1MM-and-CWSkimmer-tp75
> > > 59213.html Sent from the Elecraft mailing list archive at 
> > > Nabble.com.
> > > ______________________________________________________________
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft at mailman.qth.net
> > > 
> > > This list hosted by: http://www.qsl.net Please help support this 
> > > email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html