[Elecraft] channel hopping 60m

[John Cooper]

* goes on the descriptive label or channel number?  I use the software to 
program the memories

-----Original Message----- 
From: Rick Prather
Sent: Sunday, July 15, 2012 5:40 AM
Cc: elecraft
Subject: Re: [Elecraft] channel hopping 60m

John,

The way I handle it is to use the "channel-hopping" function.

"Adding an asterisk (*) at the start of a label designates a channel-hopping 
memory (pg. 40)."

I set up the 5 channels starting with memory 60  (subtle, eh?) and put the 
asterisk in front of them.

Now, if you select any one of them, tuning with the main knob will loop 
around all 5.

Rick
K6LE

On 7/14/2012, at 8:56 , John Cooper <wt5y at gt.rr.com> wrote:

> I have the 60m frequencies programmed as memories.  So I can recall the 74 
> memories I have and get to it.  But if I just switch to the 60m band it 
> works like the rest you can tune the whole band.  On the k2 you could 
> force it to just tune the 5 bands were allowed whenever you went to that 
> band.  Is there a way to do this with the KX3?  I did read the manual but 
> could not find this.
>
> WT5Y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html