[Elecraft] Using PSK 31 with my K3, and Ham Radio Deluxe

[Don Wilhelm]

Why would one want to set the mode to USB when the K3 provides DATA A 
mode which is the same thing except that compression is automatically 
set to zero, the equalization is turned off, and the input level can be 
set to Line in and the level remembered so it is almost automatic once 
set up.

In answer to the original question, check the data submode - that is a 
per band setting.

73,
Don W3FPR

On 7/13/2012 10:10 AM, Rowland R Johnson wrote:
> Make sure that mode is set to USB for the 10, 20, 30, and 40 meters.
>
> On 7/13/2012 6:50 AM, Bill Thompson wrote:
>> For some reason, I can key up my K3 on 15 meters, and get power out. When I
>> send out a CQ, the red TX light comes on, I get a audible tone, and power
>> out to my antenna. The CQ message shows up on the message screen in the
>> DM780 program. When I try to send text on 10, 20, 30, and 40 meters, I get
>> the red TX light, but no audible tone, and no power out of the K3. I can't
>> see that I have anything set different for the 15 meter band than the
>> others. Any ideas?
>>
>> Thanks,
>>
>> Bill AA4MJ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>