[Elecraft] [K3] Toggle macros

[Rick Prather]

I'd also like to mention that for Mac users DL2RUM's  RUMLog also has K3 Macro support.

In the K3 control panel there is space for 12 Macros.

Now that I think about it I will have to try some of these "triple macros" in a couple of the slots I have left over.

Rick
K6LE


On 7/11/2012, at 8:31 , Jim N7US <n7us at arrl.net> wrote:

> I agree it's very cool to be able to program a toggle macro.  I just wanted
> to mention that the same can be accomplished in DXLab's Commander rig
> control module, with which you can have either eight or sixteen
> "user-defined controls."
> 
> I have two that each switch between a mic on the front panel jack and one on
> the rear and also select the desired VOX gain, mic gain, compression, TX EQ,
> and set the gain at high or low.  Another switches between two power levels,
> and others turn on/off speakers, audio mute, VOX, and spot.  They use color
> "LEDs" to indicate the state.
> 
> The user-defined controls are in the files folder of the DXLab Yahoo
> reflector, 
> http://groups.yahoo.com/group/dxlab/files/Command%20Sequences%20%26%20Slider
> s/Elecraft/ .  
> 
> Commander's UDCs have the ability to have a comment line for each line of
> the macro, as Stewart described below.
> 
> 73, Jim N7US