[Elecraft] KAT3 problem

[Barry Garratt]

Hi Dave,

Thanks for the info. It looks like mine will be heading back to the factory
also.

Have a great day.

Barry KS7DX

From: Dave Van Wallaghen [mailto:dvanwallaghen at gmail.com] 
Sent: Saturday, July 07, 2012 5:36 AM
To: Barry Garratt
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KAT3 problem

Barry, 
I just went through the same thing here. It turned out to that I had no
output from my LPA board. It is currently at Elecraft being serviced. I have
not heard from them yet as to the exact cause. It's only been in for a week
or so. 
I used a scope to verify I had RF coming into the board and a logical high
on the 7T line but no output. 
I found this trying to tune up as you did and saw the same two dashes on the
display. 
Hope this helps. 
73, 
Dave W8FGU 
On Jul 7, 2012 1:54 AM, "Barry Garratt" <bgarratt at earthlink.net> wrote:
When I hit the ATU TUNE button this evening the tuner sounded like it was
doing something but instead of the usual display of VSWR as it tuned there
were only two dash lines.

The problem is not band dependent.

Anyone ever seen this before and if so what was the cure?

Thanks.

Barry KS7DX



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html