[Elecraft] Stuck in MCU LD

[Don Wilhelm]

Larry,

Do you have a saved configuration file?  If so, try an EE INIT 
(Parameter Initialization) - then load the new firmware and reload your 
configuration.
If you do not have a saved configuration file, you will want to contact 
K3support before trying an EE Init, and you will have about an hour's 
work to load all the necessary options and do the calibration steps.

73,
Don W3FPR

On 7/6/2012 5:02 PM, K2GN wrote:
> Been there done that.  Nothing.
>
> Larry/K2GN - http://k2gn.com
>