[Elecraft] KX3 firmware 1.06 freg drift

[va3bxg at gmail.com]

The elecraft supplied mic ordered at the same time as KX3

And it is the mic that I have been using since the beginning
Robert

a 'kosher' ham 
Sent from my BlackBerry device

-----Original Message-----
From: "Bill Conkling"<nr4c at widomaker.com>
Sender: "nr4c at widomaker.com"@widomaker.com
Date: Fri, 6 Jul 2012 13:16:34 
To: <va3bxg at gmail.com>; Elecraft list<elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KX3 firmware 1.06 freg drift

What mic are you using?  If you are using something with a stereo plug, you  
might be triggering the UP button input. 

...bc nr4c

Sent from my Verizon Wireless Droid

-----Original message-----
From: va3bxg at gmail.com
To: Elecraft list <elecraft at mailman.qth.net>
Sent: Fri, Jul 6, 2012 16:54:07 GMT+00:00
Subject: [Elecraft] KX3 firmware 1.06 freg drift



 I downloaded the latest and greatest firmware and noticed something

On the 40m band, while monitoring one of the 'original 13 colonies special  
event station'. The unit freq was drifting (upwards) big time. Somethings by  
.2 units within about 1.5 seconds. And even when I returned to the frequency  
it would drift again.

While I did not have a lot of time to further test. The issue was not  
apparent on the 20m band.

I have had this issue previously, but not to this level.

Also a small observation. Now when the unit is shut down, on the VFO B, a  
series of ***** appear. This has not been observered before
Robert

a 'kosher' ham 
Sent from my BlackBerry device
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html