[Elecraft] KX-1 Sidetone Level

[Don Wilhelm]

Jim,

There is no mod that I am aware of, but if you want to reduce the 
sidetone level, I would suggest you add a high value resistor between 
the junction of C2 and R15 to ground.  Try 1 meg first - if that reduces 
it too much try higher values until you are satisfied.

73,
Don W3FPR
On 7/6/2012 12:29 PM, Jim - W6VAR wrote:
> Is there a modification that can be made to add a little more attenuation to
> the sidetone of the KX-1? I have it set to the lowest level, but I still
> find it a bit loud compared to the receive signals.
>
> Jim - W6VAR
> K3, KX-1, KX-3 (Pending)
>
>
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>