[Elecraft] using Proset-K2 with KX3

[nr4c]

Go into the MENU and look for MIC BTN or something similar.  Turn them 
OFF.  The middle two rings on the 4-way plug are for the UP/DN Buttons 
on the mic and PTT.  Your 3-way plug is shorting the PTT to ground.  
Turn OFF the buttons, and you Proset will work fine using XMIT or VOX.

...bill  nr4c

On Wed, 04 Jul 2012 22:59:52 -0500, David F. Reed wrote:
> I must be doing something wrong, but I can't seem to use my Proset-K2
> with my KX3...
>
> The headphones work fine, but plugging the microphone into the mic 
> input
> puts the KX3 into transmit mode; I had expected to use the XMIT 
> button
> on the KX3 to transmit.
>
> Ideas?
>
> 73 de Dave, W5SV
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html