[Elecraft] P3 TX Audio monitoring

[Don Wilhelm]

Guy,

That would still only give a picture of the K3 output as found by the IF 
leak-through signal.  I think a better approach is to wait until the 
external sensor is developed and released - that will show the real 
signal going out to the antenna.

73,
Don W3FPR

On 7/3/2012 9:55 PM, Guy Olinger K2AV wrote:
> Wouldn't part of displaying the TX signal have to be implemented in the K3?
>   If so it's a TWO box modification.  Fix the K3 to send the TX signal
> across the connector to the P3 instead of the RX bandwidth.  Then the P3
> would need to switch to the bandwidth needed to display the TX signal when
> the K3 was in transmit.  This last because most of the time we are watching
> on the P3 where we are NOT listening with the K3.
>
> Some other way to do that?  73, Guy.
>
>