[Elecraft] K2 Alignment and Test, Part II - No signal on TP3

[Don Wilhelm]

Cameron,

Read my last post carefully.  Then tell us whether you are seeing all 
zeros when plugged into TP3 and in CAL FCTR.  If you have all zeros, 
either your probe is bad or your PLL reference is not oscillating.

73,
Don W3FPR

On 7/3/2012 8:40 PM, Cameron Haines wrote:
> Great suggestion. I can hear it a 4Mhz now.. from my Softrock SDR. Wonder why the Freq counters couldn't pick it up however. hmm.
>
> Thanks David!
>
>
> ________________________________
>   From: David Moorman <dmoorman4 at comcast.net>
> To: Cameron Haines <camhaines at yahoo.com>
> Cc: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Sent: Tuesday, July 3, 2012 7:03 PM
> Subject: Re: [Elecraft] K2  Alignment and Test, Part II - No signal on TP3
>   
> Do you have a receiver you can listen on to see if the oscillator is actually oscillating?
>
> Dave K9SW
>
>
>
> On Jul 3, 2012, at 6:41 PM, Cameron Haines <camhaines at yahoo.com> wrote:
>
>> Correction.
>>
>>
>> Hey Guys,
>>
>> Well, I am at the part where I need to test the 4 MHz oscillator calibration and ran into a snag. I am not getting anything on two different frequency counters when connected to TP3. Test up to this point have been good. Checked all the components around X1 and all look correct. No error message on startup.
>>
>> Any ideas where to go from here?
>>
>> Thanks,
>> Cameron
>> AE5UZ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>