[Elecraft] Fw: K3 sub receiver no signals

mikefurrey at att.net mikefurrey at att.net
Mon Jul 2 10:45:05 EDT 2012





Also check the external cable to the radio. When I replaced my FT1000 with a
K3 (best move in the ham shack ever ... but I gotta say the FT1000 served me
well for 20 years), the the short section of cable from the external rx
antenna switch box to the K3 went bad. I took the K3 apart first thinking I
did not plug something in or an internal cable was not correctly seated.

73, Mike WA5POK

-----Original Message----- 
From: nr4c
Sent: Monday, July 02, 2012 6:52 AM
To: W0MU Mike Fatchett
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] K3 sub receiver no signals

I saw that someone else suggested checking all the cabling.  Good idea.
Also, press the "A>B" switch twice quickly (should see "A>B ALL" in VFO
B window) to make sure both main and sub are on same freq, filters etc.

Oh, yeah, lyou DID turn ON the Sub-rec'ver.  Didn't you?

Let's see, check internal cabling, Antenna, settings.  Oh, how is your
RF/AF gain controls set up.  I have separate RF gains, but the AF gains
are set up so that the little knob is volume, and the larger one is a
fader.  How are your set up?

./...bill  nr4c
On Sun, 01 Jul 2012 22:49:36 -0600, W0MU Mike Fatchett wrote:
> The 2nd receiver was hooked up to the bnc aux connector.  I had to
> change that.  However still no signals.  I have tried every
> combination of antennas etc.
>
> I suspect maybe there was an issue when I uploaded the new firmware.
>
>
> Mike W0MU
>
> W0MU-1 CC Cluster w0mu.net
>
> On 7/1/2012 9:33 PM, Bill Conkling wrote:
>> Check antenna wiring, and make sure you have selected an antenna for
>> the
>> SUB.
>>
>> ...bill  nr4c
>>
>> -----Original Message-----
>> From: W0MU Mike Fatchett [mailto:w0mu at w0mu.com]
>> Sent: Sunday, July 01, 2012 10:32 PM
>> To: Elecraft Reflector
>> Subject: [Elecraft] K3 sub receiver no signals
>>
>> I installed this 2nd receiver quite some time ago.  I probably never
>> checked but i hear background noise in the sub receiver but no
>> signals.
>> I suspect this is something stupid, can someone point me in a
>> direction.
>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 



More information about the Elecraft mailing list