[Elecraft] [W2] How do I correctly read the W2?

[Don Wilhelm]

Ian,

The numbers above the LEDs will give you the power level - all that is 
required is to decide whether to add one or two zeros to the number 
indicated - no high level math involved.  If you know what scale you are 
on, the lighted segments will indicate your power.

73,
Don w3FPR

On 1/31/2012 11:59 AM, Ian Kahn wrote:
> Last week I ordered, assembled, and installed in my station the W2
> wattmeter.  Now that I have it, I want to make sure I'm reading the power
> output levels correctly, especially as I use it to help tune my AL-811H.  I
> assume that I divide the output power referenced (i.e. 2K) and divide it by
> 20.  Therefore one LED on the power meter represents 1/20 of the selected
> scale power.  Am I assuming correctly, or is there some error in my logic
> here?  Any and all info is much appreciated.
>
> Thanks.
>
> -- Ian
> Ian Kahn, KM4IK
> Roswell, GA  EM74ua
> km4ik.ian at gmail.com
> K3 #281, P3 #688
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>