[Elecraft] KAM+ Connections

[Dave Johnson]

Joel

I am surprised that the audio levels seem to be an issue, I haven't
used mine for ages with the K3, but my SCS modem levels are 500 mV
(PSK and FSK amplitude) on transmit into the line input of the K3,
line input set to 30 on the K3. The K3 line out is 045 and not mixed
with phones. It works fine on 010, the default K3 setting too.

There are some settings on my web page: www.astromag.co.uk/amtor/ The
modem settings are shown for an SCS PTC-IIex, but there will be
equivalent settings for a KAM (note the tone orientation on the KAM
differs from the SCS modem, for RTTY/AMTOR on the SCS use DATA A and
DATA A "REV" for the KAM).

You might try looking for a Pactor contact on 14.1125 (LSB or REV TX
DATA), that should equate to a centre frequency of 14.111 MHz, an
often used Pactor channel. You can see who is around from the website
http://hamspots.net/arq/

73 Dave, G4AON