[Elecraft] NR on VFO B ?

[Guy Olinger K2AV]

You have to set the subRX NR and NB after using the bSET hold button. To
NOT have this separation of would be a problem on 160 listening to TX
antenna on main and a RX antenna on subrx in diversity mode.

73, Guy

On Fri, Jan 27, 2012 at 12:04 PM, Bob K6UJ <k6uj at pacbell.net> wrote:

>
> When working split I would like the NR setting to be applied to both the A
> vfo and the B vfo.
>
> I tap A > B once to copy VFO A'S frequency to VFO B.
> Then I tap A > B again and it copies VFO A's filter settings, preamp
> state, etc just as it
> says in the manual.  The NR setting however is not transferred to VFO B.
>
> What am I doing wrong ?  Something else I need to do to transfer the NR
> setting ?
>
> thanks,
> Bob
> K6UJ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>