[Elecraft] K3 Headphone socket problem

[Keith]

Do you have a saved config file from before this problem occurred?
If so, try loading it. (maybe save your current file first).
If you don't have an old file, save your current file, do an EEINIT. You 
will have to set up some basic things, but should be able to test to see 
if the headphone jack problem is fixed.
If fixed, reload your saved config, and write down ALL parameters of all 
menus and also the Filter setup.
The do EEINIT again and enter everything manually.
The headphone switching is all done by computer and gets glitchy sometimes.
Keith

On 1/21/2012 2:20 AM, DK2GZ at aol.com wrote:
> Hello
>
> the menu parameter SPKR+PH is set = NO
>
> When I plug the headphone into the rear socket there is also audio through
> the front socket, but only if I plug in a second headphone also into the
> rear  socket.
>
> If I only plug it into the front socket there is no audio in the headphone
> and the internal speaker is not muted.
> I guess I need a new front socket and how difficult is the replacement?
>
>
> 73 de Harry,  DK2GZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>