[Elecraft] K3 Hum on transmit

[Don Wilhelm]

Cary,

Is it hum or is it actually "buzz"?  Hum is 60 Hz AC, but buzz will be 
of various frequencies, and it is difficult to tell them apart with just 
your ears as detectors.

Does it disappear if the microphone is not connected?  Use XMIT to put 
the K3 in transmit while you are listening.  If it is only when the 
microphone is connected, you may have a broken wire in the mic cable.

73,
Don W3FPR

On 1/23/2012 10:10 AM, Hunsdon Cary III wrote:
> K3 Experts:  My K3-100 has been flawless in its performance until yesterday.  I had a schedule with W5ZNN who told me I had a hum on my signal; I put my headphones on and sure enough there it was on transmit.  I tried plugging the Astron 35M directly into the AC outlet instead of the outlet strip - no luck, hum was still there.  I connected the K3 to my SEC 1223 switching power supply and, you guessed it, the hum is still there.  I hate to think there's something amiss with the K3 but it looks that way.  Any ideas?
> 73,
> Cary, K4TM
> Lynchburg VAh
> h3cary at gmail.com
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>