[Elecraft] "New K3 utility software required" message on my K3?????
Dick Dievendorff
dieven at comcast.net
Sat Jan 21 20:46:47 EST 2012
This could be data corruption while loading the DSP.
The DSP load frame contains a prefix and if that prefix is not what the MCU
firmware's DSP loader expects, the MCU firmware may interpret the corrupted
frame as an old DSP load protocol that we retired a few years ago and issue
that diagnostic message on the K3 LCD front panel.
If you have an alternate USB port on your computer, another computer, or
USB-to-Serial adapter, give that a try. I'd reload all firmware if it were
my radio.
Dick, K6KR
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of NH7RO
Sent: Saturday, January 21, 2012 4:45 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] "New K3 utility software required" message on my
K3?????
OK, Don, but I already uninstalled my original K3 utility and downloaded the
latest version. I'm still getting the same message on my K3.
Perhaps I'll uninstall and reinstall eveything all over again. Pulling my
hair out, too.
It all started when I was operating split this morning to work VP6T on 12m,
then I qsy'd to 10m to work them there and later noticed I couldn't hear
anything on my sub receiver.
Long story short I checked the config menu settings and then started getting
the ERR DSE message there (E000202 and E05008d, too) and then the New K3
Utility message cropped up on my screen...
Thanks for your help and any other comments/suggestions welcome.
I'll post here as soon as I might be succesful (fingers crossed on the DSP2
upload!)
73, Jeff
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-K3-utility-software-required-messag
e-on-my-K3-tp7212149p7212192.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list