[Elecraft] Placement and cooling

[AC6JA at aol.com]

So I take it you wouldn't want to stack the K3 on top of the KPA500 or vice 
 versa?
I'm trying to figure out right now how to make space for a KPA500 and  a P3.
 
Mike  AC6JA
 
 
In a message dated 1/21/2012 2:21:03 P.M. Pacific Standard Time,  
w3fpr at embarqmail.com writes:

The  KPA500 requires a minimum of 2 inches above the enclosure and also 
behind  the fan.

73,
Don W3FPR

On 1/21/2012 8:23 AM, W2BLC  wrote:
> Are there any limitations in the placement of the K-line  equipment
> regarding side-by-side placement? What about top  clearance?
>
> Am I correct in assuming that open to the front and  open to the back is
> sufficient?
>
> I will building a  custom desk to accommodate - that is the reason for
> the  questions.
>
> Thanks,
>
> Bill  W2BLC
>
______________________________________________________________
Elecraft  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/elecraft
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Elecraft at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html