[Elecraft] [K3] Aliases in Softrock panadapter display

[k5oai]

I use LP-Bridge v1.02 and NaP3 with my K3 and softrock my Global settings
differ
Global offset has to be set at -23070 the rest are the same as Tony's.

I have tried to use LPB2 v1.01
and neither the -6000 or 23070 settings work for me
for starters receive is on the wrong side no matter which LSB or USB
and checking or un-checking I/Q shift doesn't fix it
after playing a while PERHAPS if I set the global for -6000
and then played with each mode's setting individually, I could get it to
work

much to much effort
I finally just settled for running 
LP-Bridge v1.02 and NaP3
works great.

--
ymmv
Sam Morgan
K5OAI


Tony Estep wrote
> 
> Stewart, my NaP3 setup calls for
> Sampling rate 96000
> then on the IF freq page:
> Global offset -6000
> LO Center 8215000
> swap I/Q yes
> This gives 48khz on each side.
> 
> BTW, Arie, try NaP3. It gives the same display as PSDR-IF but
> apparently has no bugs; at least I've encountered none in 3 months of
> continuous use.
> 
> 73, Tony KT0NY
> 
> 
> On Fri, Jan 20, 2012 at 4:52 AM, Stewart Rolfe <gw0etf@> wrote:
>>
>> I've set up my Softrock panadapter again using NaP3....
> 
> 
> -- 
> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at .qth
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Aliases-in-Softrock-panadapter-display-tp7207106p7208572.html
Sent from the Elecraft mailing list archive at Nabble.com.