[Elecraft] [K3] RTTY problem

[Mike]

Left off

73, Mike NF4L

On 1/15/2012 7:23 PM, Mike wrote:
> Using MMTTY and AFSK, a USB sound card, cables to line in/out. The proper sound card
> is selected in MMTTY. MAIN:MIC SEL is Lin In, the level is 7. LIN OUT level is 8. The
> sound card's Windows sliders are at about 2/3 scale, nothing muted. The sound
> (Creative) card is producing a diddle. VOX is on. Mode is DATA, AFSK A 45
> bps.Mark/Shift is 2125/170 in both the K3 and MMTTY.
>
> On receive, nothing shows on the MMTTY scope, and nothing is decoded. If I change
> bands, the scope displays both the wavy line and the waterfall for about 7 seconds,
> then it all goes away, dropping off the bottom of the display.
>
> The K3 does not go into transmit.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>