[Elecraft] De-sensed K3 after xmit

[Jack Berry]

Thanks everyone. I'll check AGC and PL-259's today when I get back to the shack. I have  not (purposefully) touched AGC so it should at default settings. Seldom use noise reduction either. I will pay close attention to signal strengths as well. 

Jack

On Jan 15, 2012, at 7:32 AM, "Dave, W8OV" <w8ov at verizon.net> wrote:

> I had a similar problem years ago with other gear.  It all went away 
> when I replaced a connector feeding the coax through a wall.
> 
> --Dave, W8OV
> 
> On 1/14/2012 9:15 PM, Jack Berry wrote:
>> Anyone have a similar experience?
>> 
>> Only occasionally, I notice that when I end a transmission my K3 receive seems almost muted.  It recovers to normal sensitivity very quickly. I so far see no pattern to the effect that might suggest a cause.
>> 
>> Thanks,
>> Jack - WE5ST
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html