[Elecraft] K3 and Fldigi CW

[Don Wilhelm]

Mark,

Fldigi uses the soundcard audio for most everything it does, so put the 
K3 into DATA A mode when working with fldigi and all will be well.

73,
Don W3FPR

On 1/13/2012 7:29 AM, pastormg2 at verizon.net wrote:
> Good Morning.  I downloaded and installed Fldigi last evening and have the k3.xml file installed for the rig interface.  The only problem is that when I switch to cw on my K3 and then change Fldigi to cw the program will not decode the code received.  But if I switch the K3 to data then Fldigi to cw then the program will decode the cw. I know this can't be the way that it should be, but don't know enough about Fldigi to make the necessary changes in setup.  Plus if I try to send anything with the K3 in data it will transmit in the mode that I have picked which is PSK31.  Any help or suggestions would be much appreciated.  Thanks!!  Mark KB3Z
>
>