[Elecraft] [K3] Stuck in Transmit

[Bill K9YEQ]

Have you tried removing power from the K3 and then power it on?

73,
Bill
K9YEQ


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David Guernsey
Sent: Thursday, January 12, 2012 3:00 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] [K3] Stuck in Transmit

My K3/10 is stuck in transmit.  I recently changed power strip/surge
protector for the power supply to a strip that uses one of the pieces of
equipment as a control to turn all the others on and off.  I have my Mac
Mini as the control piece of equipment with the monitor and printer power
controlled by the computer.  The Astron RS-35M, which supplies power to the
K3, is in a non-switched plug on the power strip.  I have read the K3 Owners
Manual and can not find any solution for the problem.  I have checked that
K3 is not in VOX, and that the PTT is not stuck.  Additionally, if I go into
the MENU or CONFIG modes, the VFO B knob does not change the display, so I
cannot check the configuration.  Any help would be greatly appreciated.

 
73 de Dave KJ6CBS