[Elecraft] KPA1500? or Possible screen-less P3? Re: P3 SVGA Adapter with FFT Processor now available to order

[Pete Smith N4ZR]

Something for my wish-list at least, would be a P3 without its own 
screen, with the P3SVGA's capabilities.  I have plenty of monitors.  
Presumably cost would be usefully lower than the P3 + P3SVGA.  On the 
other hand, I know that the folks at Elecraft are really busy, so...

If I really could have my way, the next thing would be a KPA1500 using 
3X the KPA-500 amp modules and the biggest toroidal transformer you ever 
saw.  But wait - didn't I see that at Dayton a few years ago?

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000


On 1/11/2012 9:17 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
> The P3SVGA wide screen video adapter for the P3 Panadapter with high
> performance FFT processor is now available for ordering. See:
> http://www.elecraft.com/P3/p3.htm#svga
>
> The P3SVGA adapter adds wide screen display capability to the P3 (up to
> 1920x1080p). It also has a dedicated high speed FFT processor that
> performs a 2048 point FFT in parallel with the P3's existing processor,
> for a much higher frequency resolution per dot display on the larger
> screen. The P3SVGA adapter is a plug-in internal card to the P3 that can
> be easily added by the user.
>
> The P3SVGA also includes an interface for our future USB keyboard option
> that will allow direct digital mode operation via the K3 and P3, with
> data display in a P3.
>
> Currently supported native screen resolutions  (other resolutions may be
> added in the future):
>
>       1024 x 768
>       1280 x 1024
>       1440 x 900
>       1600 x 900
>       1920 x 1080
>
> Note: Most other resolution flat screen displays also support the next
> lower P3 screen resolution.
>
> Like the P3, the P3SVGA is firmware downloadable and new features will
> be available over time.
>
> The P3SVGA is now available on our order page.  Its estimated starting
> ship date is Feb. 21st.
>
> 73,
>
> Eric
> ---
> www.elecraft.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>