[Elecraft] ladderline and balun question

[n5ge at n5ge.com]

Now that you know change caused RF in the shack, why not just put it back like
it was?

73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member

"Only a white man would believe he could cut the top
off of a blanket, sew it to the bottom and have a longer
blanket."

-- Old Indian comment about Daylight Saving Time

On Wed, 11 Jan 2012 16:12:20 -0500 (EST), goldtr8 at charter.net wrote:

>Gents,
>
>I have a ladder line and balun question that I hope someone can guide me 
>thru.
>
>I had a good working antenna system with two antennas.  First being an 
>Alpha Delta Dipole and the second a 2WL 160m loop antenna at 40 ft in 
>the air strung in trees.  So the wire does touch the trees.
>
>Dipole is fed with coax and choked at the feed point and the loop was 
>fed with 60 ft of ladder line to a 1:1 current balun then 25ft coax to 
>the shack tuner.  Then the amp and radio.   This combination was working 
>real well no RF problems in the shack.
[snip]