[Elecraft] K3 macro help
Joe K2UF
joe at k2uf.com
Sat Jan 7 20:57:09 EST 2012
Thanks Mike,
Part of my problem was I have an old copy of the pgmrs ref rev A. It only
has 11 pages. Just downloaded the latest rev. That should help.
73 Joe K2UF
No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.
-----Original Message-----
From: Michael Downs [mailto:ks7d at verizon.net]
Sent: Saturday, January 07, 2012 8:39 PM
To: Joe K2UF
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 macro help
Joe,
The SB command is in the K3 Programmer's Reference. Look in the Command Set
Overview, Table 1 on page 1 and in the Command Reference section on page 16.
Its listed as SB *, not SBx. SB0; turns the sub receiver off and SB1; turn
it on.
Mike, ks7d
On Jan 7, 2012, at 8:07 PM, Joe K2UF wrote:
> Thanks to all who helped me with my first try at K3 macros. I looked thru
> the k3 programmers ref. but could not see anything about the SBx command.
> Is there another reference manual with more in depth info that I need?
>
> Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many
electrons
> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list