[Elecraft] K3 Internal Tuner Question

[GW0ETF]

John,

No harm to leave the external meter in line, just don't use it's readings..

I have a Palstar ATU in line for when I use my amp with my multi-band
doublet. When the amp is not switched in I'll often bypass the ATU and use
the KAT3. The swr meter in the Palstar atu is still in-line however and will
indicate forward and reflected powers consistent with whatever swr is on the
line between the KAT3 and antenna; the swr reading on the K3 is all that
matters in this case but the external meter is not doing any harm....

73,

Stewart, GW0ETF


John Dziedziejko wrote
> 
> Thanks for the responses, will take the Palstar out and hook the antenna
> directly to the K3 and go by the K3's swr meter and power output
> indications.
> 
> Best regards,
> 
> John W9QP
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at .qth
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 


--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Internal-Tuner-Question-tp7143059p7144340.html
Sent from the Elecraft mailing list archive at Nabble.com.