[Elecraft] K2 errormessage

[Don Wilhelm]

Allan,

A brief display of the firmware level normally happens if you hold a 
button in when powering the K2 on.
You either have a button stuck (electrically or physically), or there is 
a soldering problem on the front panel.
Make certain pin 1 of Front Panel RP1 is soldered and that RP1 is 
oriented correctly (the dot on the package is next to the pin 1 location).

73,
Don W3FPR

On 1/2/2012 10:02 AM, Allan Glasdam wrote:
> Hi all and happy new year
> When I tune my K2/10 on 10 mc I get the message: 2.04r 1.09.
> Voltage is 13,6 0.35
> Any ideas and solutions would be appriciated.
> Allan, OZ8A
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html