[Elecraft] K3/100 QRP Operation?

[WILLIS COOKE]

Jim, it is easy to turn down the power.  Just use the power control and you can set any power you want down to 100 mw.  The amp will kick out of the circuit when you set a power below 12 watts.  I have not tested the power reading very well, as I have no watt meters that I think are more accurate than the K3 watt meter, but it tracks pretty well with my Daiwa which is of totally un-known accuracy.  Go for it, you will like it!
 
Willis 'Cookie' Cooke 
K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart


________________________________
 From: Jim Miller <jim at jtmiller.com>
To: Elecraft Reflector <elecraft at mailman.qth.net> 
Sent: Sunday, January 1, 2012 10:46 PM
Subject: [Elecraft] K3/100 QRP Operation?
 
I've currently got a K3/10 (#1210) and I'm considering adding the 100w amp
option. Once I do this how difficult is it to revert to QRP? Does the power
control make this easy?

Thanks

Jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html